Lift Motor Error - 0xC6FD0013

Lift Motor Error - 0xC6FD0013

The lift motor is responsible for moving the printbar-related mechanisms via gears.

If an issue occurs with the motor or gears, the following symptoms may arise:

  • Freezing during initialization

  • Clicking or grinding noises from the gears

  • Poor lifting/lowering operation and failure to return to the home position

  • Printbar-related errors

Error 0xC6FD0013

This is a printbar-related error code found in the HP X476dw. However, a lift motor failure cannot be confirmed by this code alone. You must also inspect the printbar connections, FFC cables, drive mechanisms, and sensors.

Appropriate Grease for Surrounding Gears

For plastic gears, use a synthetic gear grease that has been verified for material compatibility.

  1. Remove old grease and dust.

  2. Check gear teeth for wear or cracks.

  3. Inspect the gear shaft and its rotation status.

  4. Apply a small amount of grease to the gear contact surfaces.

  5. After reassembly, check for noise and verify operational status

Comments

No comments yet. Be the first to comment!

Add Comment