HP OJ 8710 - Head Error 0xc19a0040

HP OJ 8710 - Head Error  0xc19a0040

Title: Resolving Printhead Recognition Error [0xc19a0040]

Today, I was inspecting a machine retrieved from a long-term rental. It displayed a printhead error message, so I proceeded with a repair.

This error message popped up, and upon disassembling the device, I found that the carriage cable (FFC) and the carriage board were contaminated.

While the standard procedure is to check the symptoms by replacing parts one by one, the FFC connector area on the carriage board was also contaminated. Therefore, I replaced the carriage cable and cleaned both the carriage board and the media sensor FFC.

I tested it with 3 normal printheads, and it worked perfectly without any errors.

Comments

No comments yet. Be the first to comment!

Add Comment